Does Cherne offer a plug that can be used to plug a bathtub waste and overflow when conducting a rough-in test?
addremove
Yes. The #012678 Tub Plug Set.
Does Cherne off a Mechanical Plug that can be used to block and fill with water a DWV when conducting a rough-in test?
addremove
Yes. the Iron Grip Plugs can be used for this application and comes in sizes 2", 3", 4", 6", 8", 10" and 12".
What is the difference between SDR 35 and SDR 26 pipe?
addremove
Both pipes have the same outside diameter. SDR 35 has a thinner wall that SDR 26.
What pipe sizes are covered by F679?
addremove
18" to 48"
What pipe sizes are covered by D3034?
addremove
4" to 15"
What is “Base Inside Diameter”?
addremove
“Base Inside Diameter” is average inside diameter less manufacturing tolerances for out of roundness and wall thickness. The ASTM uses base ID to calculate deflection allowances.
Does Cherne offer a flow-through plugs?
addremove
Yes. Cherne offers the T-Handle Gripper as a flow through plug.
What gripper should be used when permanently blocking a hole?
addremove
Mechanical plugs can be used to permanently block an opening (Grippers are mechanical plugs). Be sure to use the correct size Gripper for the opening.
What is the maximum temperature that the original gripper plugs be exposed to?
addremove
Gripper plugs have natural rubber O-Rings. These O-Rings allow for operating temperatures between 0° F to 125° F. Consult engineering for usage outside this temperature range.
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.
